0695B000 OEM Genuine Nutone Vent Bath Fan Motor Wheel for QT80

AUD240.45
SKU:
0695B000
UPC:
026715233793
Condition:
New

Product Description

Up for Sale is a Nutone Blower Assembly Number 0695B000.

This motor & Blower Wheel is a Replacement for Nutone Bathroom Exhaust Fans.

Fits Nutone Fan Model QT80 and Motor number 86323000.


New and Improved PSC Capacitor Start Motor. 

Exclusive to the OEM Manufacturing.

Higher Efficiency

Quieter than a Shaded Pole Motor


Specifications:

  • Single Speed
  • CW Rotation     
  • 120 Volt     
  • 1180 RPM's     
  • 0.27 Amps     
  • 2 Prong Plug     
  • Ground Wire     
  • Blower Wheel Included 6-1/4" Diameter x 2" Height
  • Metal Mounting Shroud has 3 holes spaced 5-3/4" apart, center to center
  • New and Improved PSC Capacitor Start Motor. Exclusive to the OEM Manufacturing
  • 3.0 / 250 Volt Capacitor Included and Wired in Series with the Plug.


Product Reviews

Write a Review
  • 5
    replacement fan motor

    Posted by Ed Mullaney on 25th Dec 2021

    Product arrived packed well -easy install -have a quite quest bath now!

  • 5
    intone vent fan motor

    Posted by Ralph Ciccone on 22nd Jun 2021

    perfect fit for my fan very quiet and a very easy install

  • 5
    0695B000 OEM Genuine Nutone Vent Bath Fan Motor Wheel for QT80

    Posted by Bill Hoehler on 27th May 2020

    Is exactly what I ordered and was described and pictured.
    Arrived sooner than expected.
    Much quieter than 30 year old motor it replaced and a perfect fit.


  • 5
    Great Replaacement Part

    Posted by R. Gene Moffitt on 7th Jan 2020

    Easy to shop on line

  • 5
    NuTone Bath Fan Motor

    Posted by Michael Marmo on 17th Sep 2019

    Great price and fast delivery.

  • 5
    Nutone bath exhaust fan

    Posted by Bruce on 22nd Jun 2019

    Was a perfect plug in fit.

  • 5
    Perfect

    Posted by Robert on 23rd May 2019

    Perfect replacement. So far no issues.

  • 5
    QT80 fan motor

    Posted by Eric King on 9th May 2019

    Easy to find on the site. Easy to order. Easy to install. Altogether, a pleasant experience. Recommend for anyone that needs replacement parts.

  • 5
    Replacement was an exact fit

    Posted by Unknown on 25th Feb 2019

    This perfectly replaced the internal workings of an old QT80 series Nutone fan unit, circa 1974. It was far less disruptive than cutting the ceiling for a new unit. Runs like new and much quieter. Big time saver, too. Installed in about 10-15 minutes start to finish. Simply remove the grill, loosen 2 screws and remove one from the housing. Lower the whole unit and unplug. Undo three screws holding the old fan motor in place, and replace with new unit. Reverse the procedure and you are done.

  • 5
    exact replacement

    Posted by Al on 14th Feb 2019

    amaszing service, fast shipping

  • 5
    1990's replacement

    Posted by norman dale bartlett on 21st Jun 2018

    NT 80 fan : ordered and called to confirm that I had the right one,purchased,shipped,received , installed, and it is as good as new.

  • 5
    easy change out

    Posted by Unknown on 8th Jun 2018

    The listed dimension was different from original but it look the same and when it got here it was the same as the old one.
    Not sure why that is.

  • 4
    Nutone Blower Assembly Number 0695B000.

    Posted by Phil on 23rd Mar 2018

    Easy to install product very similar to original blower. But has a little bit of vibration / loud noise on start for about ten minutes that’s why I gave four stars instead of five

  • 5
    As described

    Posted by dom on 14th Mar 2018

    As described easy installation and fit perfect

  • 5
    perfect fit but noisier than the old one.

    Posted by Unknown on 7th Oct 2016

    Noise level should be reduced.

  • 3
    Noise Level Is High

    Posted by Dan on 27th May 2016

    This motor & squirrel cage was an exact fit. I had to drill a small hole to attach the ground wire to the mounting flange. This motor or maybe the squirrel cage fan is louder than the original. I'm going to see if a dimmer switch or a speed switch is available.

  • 4
    A Fan of the Fan!

    Posted by Rich on 17th May 2016

    Great job on the entire process. Very timely and quality product. The Fan is in place already!

  • 5
    motot blower asm

    Posted by Laramie on 8th Mar 2016

    The Nutone bathroom fan was the replacement for the old fan,a good fit.Thank You for the good service.
    Lar

Related Products